[GSBN] Straw on edge with stud frame

Thu Jul 7 15:54:31 UTC 2016

Jim, I believe Craig White of Modcell in the UK is having good success
attaching compressed fiberboard panels (or even compressed straw panels!)
to the exterior of the bales.  You can now view his presentation he gave at
the 2016 ISBC on the conference website:  strawbuildconference.co.nz

Ian Smith, P.E.
Lopez Smolens Associates
2400 Central Ave., A-1 North
Boulder, CO  80301
303-447-2813

On Thu, Jul 7, 2016 at 3:56 AM, <gsbn-request at sustainablesources.com> wrote:

> Send Gsbn mailing list submissions to
>         gsbn at sustainablesources.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://sustainablesources.com/mailman/listinfo.cgi/gsbn
> or, via email, send a message with subject or body 'help' to
>         gsbn-request at sustainablesources.com
>
> You can reach the person managing the list at
>         gsbn-owner at sustainablesources.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Gsbn digest..."
>
>
> Today's Topics:
>
>    1. Re: Straw on edge with stick (stud) frame (martin hammer)
>    2. Re: Straw on edge with stick (stud) frame (Jim Carfrae)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 05 Jul 2016 15:27:27 -0700
> From: martin hammer <mfhammer at pacbell.net>
> To: GSBN <GSBN at SustainableSources.com>
> Subject: Re: [GSBN] Straw on edge with stick (stud) frame
> Message-ID: <D3A1825F.229DC%mfhammer at pacbell.net>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Jim,
>
> The system Jacob mentions (invented?) uses ?dense-packed? cellulose
> insulation between framing, and tight against the already stacked bales. I
> included this in a recent code change proposal for Appendix S ? Strawbale
> Construction in the International Residential Code (IRC). You can see the
> added language underlined in the section below. It was approved in April
> and
> will be in the 2018 IRC. (The IRC is the model residential code in the
> U.S.)
>
> Jacob, and others who practice this method in the northeast U.S. wanted
> this
> explicitly allowed in the U.S. SB code because it was being or they feared
> it being questioned or disallowed by building officials.
>
>
> AS104.2 Purpose, and where required. Strawbale walls shall be finished so
> as
> to provide mechanical protection, fire resistance and protection from
> weather and to restrict the passage of air through the bales, in accordance
> with this appendix and this code. Vertical strawbale wall surfaces shall
> receive a coat of plaster not less than 3/8 inch (10 mm) thick, or greater
> where required elsewhere in this appendix, or shall fit tightly against a
> solid wall panel or dense-packed cellulose insulation with a density of not
> less than 3.5 pounds per cubic foot (56 kg/cubic meter) blown into an
> adjacent framed wall. The tops of strawbale walls shall receive a coat of
> plaster not less than 3/8 inch (10 mm) thick where straw would otherwise be
> exposed.
>
>
> Related to this I?ve used 2x4 studs at 46? (117 cm) with stacked 3-string
> bales on edge in between. The studs nestle into the curved-corner joint
> between stacks of bales and stacks fit tight at bale ends.  A minimal roof
> bearing assembly the width of the bales bears on the studs (which are on
> the
> outside wall face only). I call it a ?light post and beam? system.
>
> David Arkin (on this list) and others have used a similar system, but with
> TJIs (?truss joists?) installed vertically like studs, with bales stacked
> between them. Unlike the system I?ve used, it has a vertical framing member
> both inside and outside (the ?flanges? of each truss joist) and with great
> out-of-plane strength, allowing for tall walls or other high out-of-plane
> demand designs. It has minimal thermal bridging through the OSB web of each
> truss joist.
>
> These systems don?t do one thing I think you?re trying to achieve. That is,
> adding a layer of insulation to the stacked straw bales. I like that you
> use
> wool between the studs in your system, as long as it?s packed tightly
> against the bales and framing. Trying to avoid uninterrupted vertical
> spaces
> that could be a ?chimney? for fire.
>
> Best.
>
> Martin
>
> Martin Hammer, Architect
> 1348 Hopkins St.
> Berkeley, CA  94702
> 510-525-0525 (office)
> 510-684-4488 (cell)
>
>
>
> On 7/5/16, 8:45 AM, "Jim Carfrae" <jim.carfrae at plymouth.ac.uk> wrote:
>
> > Thanks Bruce
> >
> > I?m adding an extra layer of insulation to keep up with current
> standards like
> > PassivHaus (I don?t build PassivHaus, but clients like to hear that
> you?re
> > using similar levels of insulation?.)
> >
> > Unless anyone else wants to chip in, I?ll reference Jacob as the
> originator.
> >
> > Jacob, If I continue using a version of this method would you like to be
> > credited in the documentation for planning approval etc?
> >
> > Jim
> >
> >
> > From: Gsbn <gsbn-bounces at sustainablesources.com> on behalf of Bruce
> EBNet
> > <bruce at ecobuildnetwork.org>
> > Date: Tuesday, 5 July 2016 at 16:10
> > To: Global Straw GSBN <gsbn at sustainablesources.com>
> > Subject: Re: [GSBN] Straw on edge with stick (stud) frame
> >
> >
> > Jim ?
> >
> > I?ll chime in here just to say that I first heard of the system from
> Jacob, so
> > as far as I know he deserves credit.  (Thanks, Jacob!).  You can add
> other
> > insulation fairly easily, but generally don?t need to, other than to
> plug the
> > thermal bridges created by the wood studs where there is no straw.
> >
> > Bruce
> >
> >
> >>
> >> On Jul 5, 2016, at 7:11 AM, Jim Carfrae <jim.carfrae at plymouth.ac.uk>
> wrote:
> >>
> >>
> >> Hi Dan
> >>
> >>
> >> My interest was mainly to do with combining the structural simplicity
> of a
> >> stick frame with the potential for significant extra insulation, as in
> the
> >> StrawCell example.
> >>
> >> Does your system involve much additional insulation?
> >>
> >> In the UK I have been using a 4 by 2 frame with wool as the insulation
> >> between the studs. This combines with the straw to reduce the U value
> from a
> >> nominal 0.16 W/m2K for a rendered straw wall down to 0.11 W/m2K for the
> >> hybrid wall.
> >>
> >> Jim
> >>
> >>
> >>
> >> From: Gsbn <gsbn-bounces at sustainablesources.com
> >> <mailto:gsbn-bounces at sustainablesources.com> > on behalf of Dan Smith
> >> <dan at dsaarch.com <mailto:dan at dsaarch.com> >
> >> Date: Tuesday, 5 July 2016 at 14:48
> >> To: Global Straw Building Network <gsbn at sustainablesources.com
> >> <mailto:gsbn at sustainablesources.com> >
> >> Subject: Re: [GSBN] Straw on edge with stick (stud) frame
> >>
> >> Hi Jim,
> >>
> >> We?ve been working with a similar system of bales "on end" between 2x
> studs
> >> at 2? o.c., with ply/fiber board on the exterior, and have a large
> addition
> >> to an adobe house planned to use it soon, working with Bruce King as
> >> engineer.  I?d be happy to chat as well and send details.
> >>
> >> Dan Smith
> >>
> >> d s a architects
> >> 1107 Virginia Street | Berkeley | CA 94702
> >> ph. 510.526.1935 | www.dsaarch.com <http://www.dsaarch.com/>
> >>
> >>
> >>>
> >>> On Jul 5, 2016, at 6:35 AM, Jim Carfrae <jim.carfrae at plymouth.ac.uk
> >>> <mailto:jim.carfrae at plymouth.ac.uk> > wrote:
> >>>
> >>> Hi Jacob
> >>>
> >>> Thanks for the response.
> >>>
> >>> I have been experimenting with a version of this technique myself, and
> I
> >>> principally wanted to find out if:
> >>>
> >>> 1)    I was using someone else?s ?protected? design.
> >>>
> >>> 2)    It might feature in an upcoming academic paper, and I wanted to
> know
> >>> who to reference as the originator.
> >>>
> >>>
> >>> The post that I saw had a photo of a demonstration wall section and a
> couple
> >>> of SketchUp drawings ? Was that you?
> >>>
> >>> Cheers,
> >>>
> >>> Jim
> >>>
> >>>
> >>>
> >>> From: Gsbn <gsbn-bounces at sustainablesources.com
> >>> <mailto:gsbn-bounces at sustainablesources.com> > on behalf of Jacob
> Racusin
> >>> <buildnatural at googlemail.com <mailto:buildnatural at googlemail.com> >
> >>> Date: Tuesday, 5 July 2016 at 13:39
> >>> To: Global Straw Building Network <gsbn at sustainablesources.com
> >>> <mailto:gsbn at sustainablesources.com> >
> >>> Subject: Re: [GSBN] Straw on edge with stick (stud) frame
> >>>
> >>> Hi Jim,
> >>>
> >>> We've been doing this technique for a few years now, in a few different
> >>> ways. We coined a term "StrawCell" to describe the hybrid system, a web
> >>> search for that term should turn up a few blog posts and videos. I'm
> not
> >>> sure if I was the originator of the post, as others have been using
> this
> >>> technique as well, but I'd be happy to chat further.
> >>>
> >>> Cheers,
> >>>
> >>> Jacob
> >>>
> >>>
> >>>
> >>> On Mon, Jul 4, 2016 at 4:58 AM, Jim Carfrae <
> jim.carfrae at plymouth.ac.uk
> >>> <mailto:jim.carfrae at plymouth.ac.uk> > wrote:
> >>>>
> >>>> Hello
> >>>>
> >>>> A couple of years ago details of a bale wall system using bales on
> edge
> >>>> against a stick frame were posted here.
> >>>>
> >>>> I can?t find the original post, and would like to contact the
> originators
> >>>> of the idea.
> >>>>
> >>>> Can anyone out there help?
> >>>>
> >>>> Jim
> >>>>
> >>>>
> >>>> Dr Jim Carfrae
> >>>>
> >>>> Environmental Building Group
> >>>> Room 302 Roland Levinsky Building
> >>>> School of Architecture, Design and Environment
> >>>> Plymouth University
> >>>> Drake Circus
> >>>> Plymouth PL4 8AA
> >>>>
> >>>> 07880 551922
> >>>>
> >>>> jim.carfrae at plymouth.ac.uk <mailto:jim.carfrae at plymouth.ac.uk>
> >>>>
> >>>
> >>>
> >>>
> >>>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://sustainablesources.com/pipermail/gsbn/attachments/20160705/b65a715b/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Thu, 7 Jul 2016 09:47:32 +0000
> From: Jim Carfrae <jim.carfrae at plymouth.ac.uk>
> To: Global Straw Building Network <GSBN at SustainableSources.com>
> Subject: Re: [GSBN] Straw on edge with stick (stud) frame
> Message-ID: <178D4886-6557-4891-AA09-F663CFB175E9 at plymouth.ac.uk>
> Content-Type: text/plain; charset="utf-8"
>
> Thank you to everyone for their input!
>
> Martin, we use wool in the form of manufactured batts from ?Thermafleece?
> cut to match the stud spacing, so fit is usually pretty good. I?m aware of
> the potential for ?chimney effects? and try to design them out.
>
> Jacob: The main difference between what I?ve been building and your
> StrawCell is that I use horizontal ladders made from small section baton in
> the straw part of the wall. The ladders are fixed to the studs, and are the
> width of the straw with ?rungs? that coincide with bale lengths, so they
> sit in the wall without modifying the bales. We put them in every second
> course, and they provide useful fixing points and help form the sills and
> lintels for openings.
>
> Jim
>
> From: Gsbn <gsbn-bounces at sustainablesources.com> on behalf of martin
> hammer <mfhammer at pacbell.net>
> Reply-To: Global Straw Building Network <GSBN at SustainableSources.com>
> Date: Tuesday, 5 July 2016 at 23:27
> To: GSBN <GSBN at SustainableSources.com>
> Subject: Re: [GSBN] Straw on edge with stick (stud) frame
>
> Hi Jim,
>
> The system Jacob mentions (invented?) uses ?dense-packed? cellulose
> insulation between framing, and tight against the already stacked bales. I
> included this in a recent code change proposal for Appendix S ? Strawbale
> Construction in the International Residential Code (IRC). You can see the
> added language underlined in the section below. It was approved in April
> and will be in the 2018 IRC. (The IRC is the model residential code in the
> U.S.)
>
> Jacob, and others who practice this method in the northeast U.S. wanted
> this explicitly allowed in the U.S. SB code because it was being or they
> feared it being questioned or disallowed by building officials.
>
>
> AS104.2 Purpose, and where required. Strawbale walls shall be finished so
> as to provide mechanical protection, fire resistance and protection from
> weather and to restrict the passage of air through the bales, in accordance
> with this appendix and this code. Vertical strawbale wall surfaces shall
> receive a coat of plaster not less than 3/8 inch (10 mm) thick, or greater
> where required elsewhere in this appendix, or shall fit tightly against a
> solid wall panel or dense-packed cellulose insulation with a density of not
> less than 3.5 pounds per cubic foot (56 kg/cubic meter) blown into an
> adjacent framed wall. The tops of strawbale walls shall receive a coat of
> plaster not less than 3/8 inch (10 mm) thick where straw would otherwise be
> exposed.
>
>
> Related to this I?ve used 2x4 studs at 46? (117 cm) with stacked 3-string
> bales on edge in between. The studs nestle into the curved-corner joint
> between stacks of bales and stacks fit tight at bale ends.  A minimal roof
> bearing assembly the width of the bales bears on the studs (which are on
> the outside wall face only). I call it a ?light post and beam? system.
>
> David Arkin (on this list) and others have used a similar system, but with
> TJIs (?truss joists?) installed vertically like studs, with bales stacked
> between them. Unlike the system I?ve used, it has a vertical framing member
> both inside and outside (the ?flanges? of each truss joist) and with great
> out-of-plane strength, allowing for tall walls or other high out-of-plane
> demand designs. It has minimal thermal bridging through the OSB web of each
> truss joist.
>
> These systems don?t do one thing I think you?re trying to achieve. That
> is, adding a layer of insulation to the stacked straw bales. I like that
> you use wool between the studs in your system, as long as it?s packed
> tightly against the bales and framing. Trying to avoid uninterrupted
> vertical spaces that could be a ?chimney? for fire.
>
> Best.
>
> Martin
>
> Martin Hammer, Architect
> 1348 Hopkins St.
> Berkeley, CA  94702
> 510-525-0525 (office)
> 510-684-4488 (cell)
>
>
>
> On 7/5/16, 8:45 AM, "Jim Carfrae" <jim.carfrae at plymouth.ac.uk> wrote:
> Thanks Bruce
>
> I?m adding an extra layer of insulation to keep up with current standards
> like PassivHaus (I don?t build PassivHaus, but clients like to hear that
> you?re using similar levels of insulation?.)
>
> Unless anyone else wants to chip in, I?ll reference Jacob as the
> originator.
>
> Jacob, If I continue using a version of this method would you like to be
> credited in the documentation for planning approval etc?
>
> Jim
>
>
> From: Gsbn <gsbn-bounces at sustainablesources.com> on behalf of Bruce EBNet
> <bruce at ecobuildnetwork.org>
> Date: Tuesday, 5 July 2016 at 16:10
> To: Global Straw GSBN <gsbn at sustainablesources.com>
> Subject: Re: [GSBN] Straw on edge with stick (stud) frame
>
>
> Jim ?
>
> I?ll chime in here just to say that I first heard of the system from
> Jacob, so as far as I know he deserves credit.  (Thanks, Jacob!).  You can
> add other insulation fairly easily, but generally don?t need to, other than
> to plug the thermal bridges created by the wood studs where there is no
> straw.
>
> Bruce
>
>
> On Jul 5, 2016, at 7:11 AM, Jim Carfrae <jim.carfrae at plymouth.ac.uk>
> wrote:
>
>
> Hi Dan
>
>
> My interest was mainly to do with combining the structural simplicity of a
> stick frame with the potential for significant extra insulation, as in the
> StrawCell example.
>
> Does your system involve much additional insulation?
>
> In the UK I have been using a 4 by 2 frame with wool as the insulation
> between the studs. This combines with the straw to reduce the U value from
> a nominal 0.16 W/m2K for a rendered straw wall down to 0.11 W/m2K for the
> hybrid wall.
>
> Jim
>
>
>
> From: Gsbn <gsbn-bounces at sustainablesources.com <mailto:
> gsbn-bounces at sustainablesources.com> > on behalf of Dan Smith <
> dan at dsaarch.com <mailto:dan at dsaarch.com> >
> Date: Tuesday, 5 July 2016 at 14:48
> To: Global Straw Building Network <gsbn at sustainablesources.com <mailto:
> gsbn at sustainablesources.com> >
> Subject: Re: [GSBN] Straw on edge with stick (stud) frame
>
> Hi Jim,
>
> We?ve been working with a similar system of bales "on end" between 2x
> studs at 2? o.c., with ply/fiber board on the exterior, and have a large
> addition to an adobe house planned to use it soon, working with Bruce King
> as engineer.  I?d be happy to chat as well and send details.
>
> Dan Smith
>
> d s a architects
> 1107 Virginia Street | Berkeley | CA 94702
> ph. 510.526.1935 | www.dsaarch.com <http://www.dsaarch.com/>
>
>
> On Jul 5, 2016, at 6:35 AM, Jim Carfrae <jim.carfrae at plymouth.ac.uk
> <mailto:jim.carfrae at plymouth.ac.uk> > wrote:
>
> Hi Jacob
>
> Thanks for the response.
>
> I have been experimenting with a version of this technique myself, and I
> principally wanted to find out if:
>
> 1)    I was using someone else?s ?protected? design.
>
> 2)    It might feature in an upcoming academic paper, and I wanted to know
> who to reference as the originator.
>
>
> The post that I saw had a photo of a demonstration wall section and a
> couple of SketchUp drawings ? Was that you?
>
> Cheers,
>
> Jim
>
>
>
> From: Gsbn <gsbn-bounces at sustainablesources.com <mailto:
> gsbn-bounces at sustainablesources.com> > on behalf of Jacob Racusin <
> buildnatural at googlemail.com <mailto:buildnatural at googlemail.com> >
> Date: Tuesday, 5 July 2016 at 13:39
> To: Global Straw Building Network <gsbn at sustainablesources.com <mailto:
> gsbn at sustainablesources.com> >
> Subject: Re: [GSBN] Straw on edge with stick (stud) frame
>
> Hi Jim,
>
> We've been doing this technique for a few years now, in a few different
> ways. We coined a term "StrawCell" to describe the hybrid system, a web
> search for that term should turn up a few blog posts and videos. I'm not
> sure if I was the originator of the post, as others have been using this
> technique as well, but I'd be happy to chat further.
>
> Cheers,
>
> Jacob
>
>
>
> On Mon, Jul 4, 2016 at 4:58 AM, Jim Carfrae <jim.carfrae at plymouth.ac.uk
> <mailto:jim.carfrae at plymouth.ac.uk> > wrote:
>
> Hello
>
> A couple of years ago details of a bale wall system using bales on edge
> against a stick frame were posted here.
>
> I can?t find the original post, and would like to contact the originators
> of the idea.
>
> Can anyone out there help?
>
> Jim
>
>
> Dr Jim Carfrae
>
> Environmental Building Group
> Room 302 Roland Levinsky Building
> School of Architecture, Design and Environment
> Plymouth University
> Drake Circus
> Plymouth PL4 8AA
>
> 07880 551922
>
> jim.carfrae at plymouth.ac.uk <mailto:jim.carfrae at plymouth.ac.uk>
>
>
>
>
> ________________________________
> [http://www.plymouth.ac.uk/images/email_footer.gif]<
> http://www.plymouth.ac.uk/worldclass>
>
> This email and any files with it are confidential and intended solely for
> the use of the recipient to whom it is addressed. If you are not the
> intended recipient then copying, distribution or other use of the
> information contained is strictly prohibited and you should not rely on it.
> If you have received this email in error please let the sender know
> immediately and delete it from your system(s). Internet emails are not
> necessarily secure. While we take every care, Plymouth University accepts
> no responsibility for viruses and it is your responsibility to scan emails
> and their attachments. Plymouth University does not accept responsibility
> for any changes made after it was sent. Nothing in this email or its
> attachments constitutes an order for goods or services unless accompanied
> by an official order form.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://sustainablesources.com/pipermail/gsbn/attachments/20160707/d6acfa8b/attachment.html
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Gsbn mailing list
> Gsbn at sustainablesources.com
> http://sustainablesources.com/mailman/listinfo.cgi/gsbn
>
>
> ------------------------------
>
> End of Gsbn Digest, Vol 61, Issue 7
> ***********************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sustainablesources.com/pipermail/gsbn/attachments/20160707/48432469/attachment.htm>