[GSBN] Hand Compressed bales

[Andy Horn]

Dear Darcey & others

Some time back in the Dec 2006 Last Straw there was an article about the
work of Darcey Donovan and Greg Zaller in an earthquake struck area of
Pakistan, where they used hand compacted bales using car jacks to make their
bales for some community projects.

 

We have a Hospital project in the icy highlands of the small mountain
kingdom of Lesotho, where the locals are growing wheat (organically) and
harvest by hand. We intend to build using straw bales and I am looking
specifically for information about how best to make and utilize a hand
compactor. 

 

We did already make up a simple timber mould simply to establish the
quantity and hence cost of the supply of the straw that we would likely need
to bale with. We used a hacksaw (with a fine steel cutting blade) to cut the
straw, placing the cut ends to the outside and thinning ends towards the
inside alternately so as to lay it in a regular fashion. We did not try use
a car jack as at that stage we were just looking at quantities. The locals
sell their straw in bundles for roof thatching. We found that it will take
approximately 20 of their bundles to make a single bale.

 

In order for the idea to be replicable we need to keep it as simple but
effective as possible. There is a local metal worker who could weld up a
mould for us and I am sure we can lay our hands on some car or lorry jacks.
I have never been down this road before and have no idea of the finer
technicalities of making your own bales. 

-          Are there certain car or lorry jacks that work better than
others?

-          how to best design the mould?

-          how best to lay the straw into the mould?

-          What kind of level of compression is one looking for and how does
one establish the right level of compression?

-          How to get this as efficient as possible?

-          What can go wrong?

-          etc etc 

I did already try follow John Glassfords link on his web site that he
mentioned (see his mail below) in regards to looking at this for th Haiti
project, Thanks John ..but would appreciate much more specific detail.

 

 

The other thing that came up was the possibility to make thinner bales for
internal walls ..but again I have had no experience with this.

 

Any input would be hugely appreciated.

 

 

Many thanks

 

Andy Horn

 

 



G ' day Balers

Sounds good to me bales for Haiti. Remember it was an earthquake and if you
have not seen the work been done by Darcy Donovan here is a story posted
some time ago now:

(Just scroll down)

http://glassford.com.au/main/?paged=5

Also you must all have seen the video of the test done in Reno:

http://imedia.unr.edu/shakertables/straw_bail_house_test_270.mov

I love the hand baler that the Pakistanis are using.

Seeing there is high unemployment in Haiti and if there is any rice straw in
the paddocks then the hand balers would work.

Anyone know how Darcy is going last time I heard Darcy was still in
Pakistan?

Kind regards
The Straw Wolf
Huff 'n' Puff Constructions
http://www.glassford.com.au
61 2 6927 6027
In Australia (02) 6927 6027

Mountains of the Moon 2011
http://www.mountainsofthemoon.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sustainablesources.com/pipermail/gsbn/attachments/20111103/23d87530/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 15324 bytes
Desc: not available
URL: <http://lists.sustainablesources.com/pipermail/gsbn/attachments/20111103/23d87530/attachment.gif>