<div dir="ltr"><div><div>Hello Laura,<br><br></div>I think that John suggested some good solutions, and I'm not sure if this is helpful, but in Korea, a popular method is to stack bales between a double 2x4 frame, compress and secure them with 36mmx36mm lumber spanning the interior and exterior 
frame. Photos and further details can be found at the following link:<br><a href="http://holzhueter.blogspot.jp/2011/10/straw-bale-building-in-korea.html">http://holzhueter.blogspot.jp/2011/10/straw-bale-building-in-korea.html</a><br>
<br></div>Also, when I was in Germany in 2011, Dittmar Hecken explained that sometimes he builds bale walls on the floor by framing two 40mmx180mm boards on 460mm centers and laying the bales between the boards, so that when the wall is raised upright the bales are standing lengthwise. Apparently the bales are compressed and secured on the floor before the wall is raised. Someone from Germany on this list might be able to provide more details. <br>
<div><div><div><div><br></div><div>I've never done this personally, but in both cases, after plastering, could you attach furring strips to the framing through a green plaster? If this wasn't possible, would it be too tedious to attach the furring strips before plastering and plaster between them?<br>
<br></div><div>Kyle</div></div></div></div></div>