<div dir="ltr"><div><div><div><div><div>To answer Derek and EJ's questions:<br><br></div>120mm x 60mm posts spaced 455mm on center. 9mm structural plywood on the exterior of the posts and a woven membrane on the interior.  120mm of cellulose insulation. The bales are packed fairly tightly against the woven membrane.  Probably more discontinuities and air gaps than the method described by EJ. I don't think there was a rational for installing the cellulose insulation first. Pressed for time and protection from the elements.<br>

<br></div>With no supplemental heating other than passive solar design, the average indoor and outdoor temperatures in January, 2012 were 8C and -2C, respectively.<br><br></div>Placing the bales on either the inside or outside of a conventional timber frame is cumbersome, and I don't have a good solution. When bales are placed on the exterior of the timber frame:<br>
</div>1. Plaster the interior side of the bales and hang drywall or wood lath on posts.<br></div><div>2. When the posts can be spaced 910mm on center, finish the interior face of the bales with plaster and expose the posts and diagonal bracing.<br>
</div>3. Build a bamboo lattice on the posts, stuff the 12mm gap with straw bundles, and finish with plaster.<br><div><div><div><div><div><div><div><div><div><div><div><br></div><div>Kyle<br></div></div></div></div></div>
</div></div></div></div></div></div></div>