G ' day<div><br></div><div>This chap called me out of the blue and has a problem with mould in his walls.</div><div><br></div><div>It is only in the interior walls and not on the exterior bale walls.</div><div><br></div>
<div>If anyone can offer him a solution that would be much appreciated.</div><div><br></div><div>We did not build this house so I have no idea of scope, size and method used apart from it is an in-fill.</div><div><br></div>
<div>Climate should not be a major problem however it is sub-tropical but we have built several buildings in the same area with no problems and they have been up for a while now, some over 12 years old.</div><div><br></div>
<div><div>Kind regards</div>Susan and John Glassford<br>Huff 'n' Puff Constructions<br><a href="http://www.glassford.com.au/" target="_blank">http://www.glassford.com.au</a><br>61 2 6927 6027<br>In Australia (02) 6927 6027<br>
</div><div><br></div><div>Mountains of the Moon Climb 2011<br><a href="http://www.mountainsofthemoon.org/" target="_blank">http://www.mountainsofthemoon.org</a>
</div><div><br><div class="gmail_quote">---------- Forwarded message ----------<br>From: <b class="gmail_sendername">Ola Anderson</b> <span dir="ltr"><<a href="mailto:ola5@bigpond.com">ola5@bigpond.com</a>></span><br>
Date: 20 March 2012 20:02<br>Subject: Strawbale wall mold<br>To: <a href="mailto:jacksflat@gmail.com">jacksflat@gmail.com</a><br>Cc: <a href="mailto:ola5@bigpond.com">ola5@bigpond.com</a><br><br><br><br>
<br>
Location: Sunshine coast Queensland Australia<br>
<br>
Situation; the cut side of the bales began to appear as water marks through<br>
the interior render. Mould odour followed promptly. All the interior walls<br>
are now showing this symptom. None of the exterior walls show any of these<br>
symptoms.<br>
<br>
Interior climate; of house is good. However during the wet season relative<br>
humidity inside is approx 55%. Out side 60% at 12 noon<br>
The house is well ventilated with plenty of louvered windows.<br>
<br>
History;        House is one and a half years old.<br>
                Built on a concrete slab<br>
                Post and beam construction<br>
                Bale walls are in fills, sitting on a water proof membrane,<br>
and a bed of gravel. The bale walls are strapped.<br>
                Bales used were high quality Oat.<br>
                Roof over hangs are 1.5 meters so no direct rain ever hits<br>
the walls<br>
                Walls have three coats of lime render on both sides plus two<br>
coats of lime wash.<br>
<br>
I'm concerned about my family's health. Today I knocked a hole into one of<br>
the interior walls. I pulled some of the oat straw out and I can't tell<br>
really if it is damp or just cool. Visual inspection showed black tips to<br>
about 5 mm on the cut end of the straw nearest to the render. I'm not sure<br>
if that is from wetting the bales and the render during construction. But I<br>
don't think so. The straw further into the bale looked normal.<br>
<br>
I fear this may be a major problem. I have a feeling the moisture level in<br>
the bales is in the hazard zone.<br>
<br>
<br>
<br>
These pictures were sent with Picasa, from Google.<br>
Try it out here: <a href="http://picasa.google.com/" target="_blank">http://picasa.google.com/</a><br>
</div><br><br>
</div>