I also used wood nailers fastened (with power-actuated fasteners) to the steel columns.<br><br>Thanks.<br>Paul<br><br><div class="gmail_quote">On Wed, Jun 17, 2009 at 10:47 PM, Jeff Ruppert <span dir="ltr"><<a href="mailto:jeff@odiseanet.com">jeff@odiseanet.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">In terms of a moisture and condensation issue, I have to agree with Paul Olivier about his comment on climate.  I would be more concerned with it in a wetter climate than a dry one.  Texas can get pretty humid though. <br>

My question to Derek is, were the walls you dismantled being torn apart due to moisture issues?  The reason I am asking is that all the walls I have dug into have been due to moisture intrusion.  I have seen rebar imbalers rusted out within a couple years because they were soaking inside a wet bale.  How many buildings do we tear apart for other reasons than moisture?  What would a non-wetted wall with steel columns look like?<br>

<br>
My next thoughts are about how a similar material to straw acts when in contact with steel.  The closest material would logically have to be wood.  I have not heard of widespread rot issues from wood being in contact with steel.  Does anyone have different observations about this?<br>

<br>
My experience with steel posts in walls has led me to believe that the expansion of the steel across it's cross-section is much less of an issue than along it's length.  As the frame heats up columns and beams grow in length quite a bit compared to their depth or width, placing stress on the plaster (if the plaster is attached to the frame).  If I were to do other steel buildings I would not attach the plaster to any steel elements.  We used wood nailers fastened (with power-actuated fasteners) to the steel columns.  Our mesh was attached to those nailers.  As the frame expands and shrinks throughout the year, it appears to place alot of stress on the exterior plaster.  The frame is set to the exterior.  I believe if the frame was on the interior this action would be eliminated.  The steel members were wide-flange moment-frame sized, not light framing like studs. <br>

We did not design the building described above and the frame and foundation already existed when were began our work.  In retrospect I would have suggested not using bales due to the fact that we could not alter the configuration to accommodate a better system.<br>

<br>
Jeff<br>
<br>
<br>
<br>
_______________________________________________<br>
GSBN mailing list<br>
<a href="mailto:GSBN@greenbuilder.com" target="_blank">GSBN@greenbuilder.com</a><br>
<a href="http://greenbuilder.com/mailman/listinfo/GSBN" target="_blank">http://greenbuilder.com/mailman/listinfo/GSBN</a><br>
</blockquote></div><br><br>