It was this problem with the cracking of the exterior stucco that drove me to seek an alternative to strawbale, especially in hot and humid climates. <a href="http://www.esrla.com/pdf/RiceHull.pdf">http://www.esrla.com/pdf/RiceHull.pdf</a><br>
<br>Thanks.<br>Paul<br><br>-- <br>Paul A. Olivier<br>27c Pham Hong Thai, Ward 10<br>Dalat City<br>Lam Dong Province<br>Vietnam<br> <br>Louisiana telephone: 1-337-447-4124 (rings Vietnam)<br>Mobile: 0906941573 (in Vietnam)<br>
Mobile: 84-906941573 (outside Vietnam)<br>Skype address: Xpolivier<br><div class="gmail_quote">On Mon, Feb 9, 2009 at 6:07 AM, John Zhang <span dir="ltr"><<a href="mailto:J.ZHANG@uws.edu.au">J.ZHANG@uws.edu.au</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><br>
<br>
<br>
Dear All<br>
<br>
This is my first post over a long period of time. One way to overcome<br>
the problem as Jeff described is to have steel posts or any type of<br>
posts embedded into the bale wall either in right in the middle or away<br>
from the exterior face of strawbale wall. Of course cross bracing then<br>
become tricky, but still can be achieved by careful detailing.<br>
<br>
<br>
Regards<br>
<br>
<br>
<br>
Dr John Zhang, MIEAust, CPEng, NPER (Civil and Structural), RPEQ (Civil)<br>
<br>
Senior Lecturer in Construction<br>
<br>
================================================<br>
<br>
Head of Program, Bachelor of Construction Management<br>
<br>
School of Engineering, University of Western Sydney,<br>
<br>
Locked Bag 1797 Penrith South DC, 1797, NSW, Australia<br>
<br>
<br>
<br>
Voice: (02) 4736 0908      Fax: (02) 9852 4300 or (02) 4736 0833<br>
<br>
Mobile: 0449 254 709  Email: <a href="mailto:j.zhang@uws.edu.au">j.zhang@uws.edu.au</a><br>
<br>
==================================================<br>
<br>
<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:GSBN-bounces@greenbuilder.com">GSBN-bounces@greenbuilder.com</a><br>
[mailto:<a href="mailto:GSBN-bounces@greenbuilder.com">GSBN-bounces@greenbuilder.com</a>] On Behalf Of Jeff Ruppert<br>
Sent: Monday, February 09, 2009 4:09 AM<br>
To: (private, with public archives) Global Straw Building Network<br>
Subject: Re: [GSBN] Lime plaster and expansion joints<br>
<br>
Laura,<br>
<br>
The horse arena that we built near you has had more cracking on the<br>
exterior walls than I expected.  We placed regular expansion joints on<br>
every post, which were roughly 20 feet apart.  The frame was steel.<br>
<br>
In looking at the cracks it seems that the expansion of the frame in a<br>
vertical direction places the panel in tension and creates the cracks.<br>
The vertical expansion joints don't do anything for this action.<br>
<br>
The interior plaster on the same walls do not show many cracks.  The<br>
frame is against the exterior face of the wall and the mesh was attached<br>
to the frame.<br>
<br>
The interior bale walls on the same project which are not exposed to the<br>
extremes of the weather have not cracked.<br>
<br>
In doing it over I would have found a way to not attach the plaster to<br>
the frame.  I am not sure how this could have been done easily, but<br>
steel frames expand and contract with temperature so much that attaching<br>
a rigid material like plaster to it can be problematic.  Maybe<br>
horizontal joints would have helped a little, but I doubt it.  From the<br>
appearance of things the magnitude of expansion and contraction was just<br>
too much for any type of plaster to deal with.  I would expect the same<br>
to happen with both earth and lime, unless you make them elastic or tell<br>
the to stretch when it gets hot.<br>
<br>
If your frame is wood these issues are going to be easier to deal with.<br>
<br>
Jeff Ruppert<br>
<br>
<br>
_______________________________________________<br>
GSBN mailing list<br>
<a href="mailto:GSBN@greenbuilder.com">GSBN@greenbuilder.com</a><br>
<a href="http://greenbuilder.com/mailman/listinfo/GSBN" target="_blank">http://greenbuilder.com/mailman/listinfo/GSBN</a><br>
_______________________________________________<br>
GSBN mailing list<br>
<a href="mailto:GSBN@greenbuilder.com">GSBN@greenbuilder.com</a><br>
<a href="http://greenbuilder.com/mailman/listinfo/GSBN" target="_blank">http://greenbuilder.com/mailman/listinfo/GSBN</a><br>
</blockquote></div><br><br clear="all"><br>