[GSBN] Fwd: High-Density bale sources

[Bohdan Dorniak]

May be of interest to you, that we have a baler here in Australia that does
bale high density bales - which are sent to the Arab states for straw for
horse stables.

I'm not quite sure of the dimensions and density - I picked one up and it
was heavy.

Bohdan

 

From: GSBN-bounces at sustainablesources.com
[mailto:GSBN-bounces at sustainablesources.com] On Behalf Of Bill Christensen
Sent: Wednesday, 28 November 2012 11:52 AM
To: Global Straw Building Network
Subject: [GSBN] Fwd: High-Density bale sources

 

(Sarah: the correct address is GSBN at sustainablesources.com)  the -owner
stuff goes only to me. 



-------- Original Message -------- 


From: 

Sarah Seitz  <mailto:sarahseitz5 at yahoo.com> <sarahseitz5 at yahoo.com>


To: 

gsbn-owner at sustainablesources.com
<mailto:gsbn-owner at sustainablesources.com>
<gsbn-owner at sustainablesources.com>

 

Hello!

 

So glad to be in touch with you folks again, and sending a big hello on
behalf of those of us doing straw bale research here at Queen's. 

 

We're looking to source a range of high-density bales for upcoming tests,
exceeding 10lbs per cu. ft. Probably only 12-24lbs/cu. ft. and not much
above, and preferably in the 14x18x30-36 dimension. We have some funds
available to pay someone to custom-bale a few lots of 8-12 bales from the
same source. The closer to our location in Eastern Ontario, the better!

 

Thanks!

 

Sarah

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sustainablesources.com/pipermail/gsbn/attachments/20121128/4baeb4d1/attachment.htm>